Redial; Last Number Redial - AT&T CL84100 User Manual

Telephone operation

Redial

NOTES:
1. If you use the speakerphone during low battery mode, the handset is not lit except for the
/SPEAKER button.
2. The speakerphone uses more power than regular handset use. If the handset battery becomes
very low while you are using the speakerphone, the call remains in speakerphone mode until you
hang up or the battery becomes depleted. When the battery is very low, you cannot switch a call
from normal handset use to speakerphone mode.
3. After installing a battery into the handset, the screen may show Low battery. If you use the
speakerphone at this time, the battery may become depleted. Follow the instructions in the
Battery installation and charging section on pages 7-8.

Last number redial

The last 20 telephone numbers dialed (up to 30 digits) are stored in the
system memory.
Using a cordless handset:
To view the 20 most recently dialed numbers:
• To display the most recently dialed number, press
REDIAL/
PAUSE
To view up to 20 recently dialed numbers, press REDIAL/
•
then qCID or pDIR, or press REDIAL/
The handset beeps twice at the end of the list.
Press OFF/
CLEAR
To redial a number:
• To dial the displayed number, press
-OR-
• Press PHONE/
repeatedly to view the redial memory. Press
displayed number.
To edit a number:
• While the desired number displays, press
(see step 5 in the To create a new directory entry section
on page 44 for details).
To delete a number:
• While the screen displays the desired number, press
delete the number from the redial memory.
.
to exit.
or /SPEAKER, then press REDIAL/
FLASH
repeatedly.
PAUSE
PHONE/
FLASH
/SELECT to dial the
MENU
/SELECT
MENU
32
Redial
888-883-2445
PAUSE
/SPEAKER.
or
PAUSE
ENTER NUMBER
888-883-2445
/DELETE to
MUTE