Direct Code Entry - RCA RCRPS04GR Owner's Manual

Direct Code Entry

Direct Code Entry lets you enter a code from the
accompanying code list for your brand of device.
TIPS: Each device key is associated with a type
of device—the TV is preset to search for TVs,
SAT•CBL•STREAM for satellite receivers, digital
TV converters, cable boxes, and streaming
media players, DVD•VCR for DVD players, and
AUDIO•AUX for audio receivers.
To program the AUDIO•AUX or DVD•VCR key for
a different type of device, see the Reassigning the
AUDIO•AUX or DVD•VCR Key section.
To control combo devices, like TV/DVDs and TV/
VCRs, you need to program each key separately.
Each key will control that part of the combo device.
1.
Manually turn on the device
you want to control.
2.
Find the Code List that came
with the remote. Locate the
section for the type of device
you're trying to program,
and fi nd your brand in that
section. Circle the codes for
your brand and keep them
handy.
3.
Press and hold the device key you want to
program (the POWER key comes on). While
you're holding down the device key, use your
other hand enter the fi rst fi ve-digit code for
your brand in the code list (the POWER key
goes off after the fi rst digit).
4.
When you've fi nished entering the fi ve-digit
code, keep holding down the device key and
look at the POWER key.
Is the POWER key illuminated?
YES: You're done! You've programmed this
device key.
NO, it blinked four times and turned off:
You have either entered a code number that
is not in the code lists or missed a step in the
code entry procedure. Try step 3 again.
6