Problem: The remote will not change channels on
device.
•
Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR,
AUDIO•AUX). This tells the remote which device to operate.
•
Press the OK / ENTER key after you enter a channel number.
•
Remove any obstacles between the remote and the device. Make
sure to aim the remote at the IR sensor on the device.
Problem: The device's menu does not appear on the
TV screen.
•
Make sure you have connected the device to your TV properly
and selected the correct input. (See your devices' Owner's
Manuals for proper connection procedures.)
•
Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR,
AUDIO•AUX). This tells the remote which device to operate.
•
Menu access isn't supported for all brands. You may need to use
your original remote control to access menu functions for some
devices.
Problem: The Learning process cannot be
completed successfully.
•
Replace batteries in both the learning remote and the original
remote.
•
Make sure the distance between the remotes is approximately
1–2 inches.
•
Do not conduct the Learning process near an incandescent lamp.
•
The learning remote's memory capacity may be full (50 Learned
commands).
•
The original remote may not be compatible with the Learning
procedure.
For more information, please visit
www.RCAAudioVideo.com
Consumer Help Line: 1-800-420-7968
Care and Maintenance
•
Keep the remote dry. If it gets wet, wipe it dry immediately.
•
Use and store the remote only in normal temperature
environments.
•
Handle the remote gently and carefully. Don't drop it.
•
Keep the remote away from dust and dirt.
•
Wipe the remote with a damp cloth occasionally to keep it
looking new.
•
Modifying or tampering with the remote's internal devices can
cause malfunction and invalidate its warranty.
27