RCA RCRPS04GR Owner's Manual page 20

All TV codes start with the number 1; all
TIPS:
VCR and DVR codes start with the number 2; all
DVD player codes, the number 3; all audio device
codes, the number 4; and all satellite receiver,
cable box, and digital TV converters, the number
5.
To exit the Code Retrieval Mode at any time, press
the EXIT•BACK key.
If you press an invalid key during the Code
Retrieval process, the remote will not respond. If
you do not press a valid Code Retrieval key (TV,
SAT•CBL•STREAM, DVD•VCR, AUDIO•AUX, INFO,
EXIT•BACK), Code Retrieval times out after 15
seconds. The POWER key blinks four times, and
then turns off.
1. Press and hold the device key (TV,
SAT•CBL•STREAM, DVD•VCR, or AUDIO•AUX)
whose code you wish to retrieve. The POWER
key illuminates. Keep pressing the device key.
2. While holding the device key down, press and
hold the P key. The POWER key illumination
turns off. After holding down both keys for
three seconds, it turns back on.
3. Release both keys. The POWER key remains
illuminated.
4. Starting with the number 1 key, press and release
each number key on the keypad in the following
order: 1-9, then 0. The number that causes the
POWER key to blink is the fi rst number of the
code. As you fi nd each number of the code, write
it down for future reference. Then start with the
number 1 key again.
5. Repeat step 4 until you have retrieved all fi ve
numbers in the code. After the fi fth number is
retrieved, the POWER key blinks briefl y, then
turns off.
TV CODE
1
SAT•CBL•STREAM CODE
5
20
DVD•VCR CODE
AUDIO•AUX CODE
DVD
DVR/VCR
DVD
TV
SAT/CBL
AUDIO
DVR/VCR