Macros - RCA RCRPS04GR Owner's Manual

Macros

The Macro feature lets you execute a sequence
of commands with one keypress. Any sequence
of commands that you regularly perform (up to
a maximum of 15 per macro) can be stored as a
Macro under one of the 1–8 number keys (up to 6
macros).
Programming a Macro
Important: Before you start, make sure your
remote is programmed to control your devices and
that you've learned all the keys you want to learn
from your original remotes.
1. Press and hold the MACRO
key until the POWER key
turns on and remains on.
The remote is now in Macro
Programming mode.
2. Press the number key
(1–8) you want to use for
this macro. The POWER key
blinks once, then remains
on.
Note: If you do not press a macro number key
within 15 seconds (or if you press a macro number
key that already has a macro programmed), the
POWER key blinks four times and turns off. The
remote exits macro programming mode, and no
changes are made to existing Macros.
3. Press the device key for the fi rst device you use
in the macro. The POWER key blinks once and
remains on.
4. Press each key you want to use in this Macro,
in the exact order the keys would be pressed
if you were executing the sequence yourself.
The POWER key blinks each time a key is
pressed. Continue this process for all keys to
be included in the Macro sequence under the
given component mode.
Important: If you are using different devices in
this macro, you must press each device key before
you start pressing the keys for that device. For
example, if you're turning on the TV, then playing a
DVD, you must press the TV key, then POWER, then
DVD•VCR, then PLAY.
5. Once you are fi nished programming the Macro,
press the MACRO key to save it. The POWER
key illumination turns off, and the Macro is
now ready to use.
23