Controls And Functions; Projector - BenQ SP920 - XGA DLP Projector User Manual

Controls and functions

Projector

1
2
3
4
5
6
1. Focus ring
Adjusts the focus of the projected picture. See
"Fine-tuning the image size and clarity" on page 28
for details.
2. Zoom ring
Adjusts the size of the projected picture. See
tuning the image size and clarity" on page 28
details.
3. POWER indicator light
Lights up or flashes when the projector is under
operation. See "Indicators" on page 50
4. Power
Toggles the projector between standby mode and
on. See "Starting up the projector" on page 23
"Shutting down the projector" on page 40
details.
5. MENU/EXIT
Turns on the On-Screen Display (OSD) menu.
When the OSD menu is activated, exits and saves
the menu settings. See
Display (OSD) menus" on page 24
6. BLANK
Used to hide the screen picture. See
image" on page 36 for details.
7. TEMPerature indicator light
Lights up if the projector's temperature becomes
too high. See "Indicators" on page 50
8. LAMP indicator light
Indicates the status of the lamp. Lights up when the
lamp has developed a problem. See
page 50 for details.
7
8
9
10
11
12
13
14
"Fine-
for
for details.
and
for
"Using the On-Screen
for details.
"Hiding the
for details.
"Indicators" on
9. MODE
Depending upon which input signal is selected,
selects an available picture setup mode. See
"Selecting a picture mode" on page 31
10. ASPECT
Selects the display aspect ratio. See
aspect ratio" on page 30
11. AUTO
Automatically determines the best picture timings
for the displayed picture. See
image" on page 28 for details.
12. Keystone/Arrow keys (
Manually corrects distorted images resulting from
an angled projection. See
page 29 for details.
Left/
Starts the FAQ function. See
function" on page 36
Right/
Locks the keys on the projector. See
control keys" on page 37
When the On-Screen Display (OSD) menu is
activated, the arrow keys are used as directional
arrows to select the desired menu items and to
make adjustments. See
Display (OSD) menus" on page 24
13. SOURCE
Displays the source selection bar. See
input signal" on page 27
14. ENTER
Enacts the selected On-Screen Display (OSD) menu
item. See "Using the On-Screen Display (OSD)
menus" on page 24 for details.
for details.
"Selecting the
for details.
"Auto-adjusting the
/ Up, / Down)
"Correcting keystone" on
"Utilizing FAQ
for details.
"Locking
for details.
"Using the On-Screen
for details.
"Switching
for details.
Introduction 9