Shipping Contents - BenQ SP920 - XGA DLP Projector User Manual

Shipping contents

Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please
contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those illustrated.
*The warranty card is only supplied in some specific regions. Please consult your dealer for detailed
information.
Projector
Quick start guide Multi-language user
Optional accessories
If you need to purchase the accessories listed below, please also contact your local dealer.
1. Spare lamp kit
2. Ceiling mount kit
Installing or replacing the remote control batteries
1. To open the battery cover, turn the remote control over to
view its back, push on the finger grip on the cover and slide
it up in the direction of the arrow as illustrated. The cover
will slide off.
2. Remove any existing batteries (if necessary) and install two
AAA batteries observing the battery polarities as indicated
in the base of the battery compartment. Positive (+) goes to
positive and negative (-) goes to negative.
3. Refit the cover by aligning it with the base and sliding it
back down into position. Stop when it clicks into place.
• Avoid leaving the remote control and batteries in an excessive heat or humid environment like the
kitchen, bathroom, sauna, sunroom or in a closed car.
• Replace only with the same or equivalent type recommended by the battery manufacturer.
• Dispose of the used batteries according to the manufacturer's instructions and local environment
regulations for your region.
• Never throw the batteries into a fire. There may be danger of an explosion.
• If the batteries are dead or if you will not be using the remote control for an extended period of time,
remove the batteries to avoid damage to the remote control from possible battery leakage.
(KOREA)
(UK) (US)
(AU)
(EU)
Power cord
Warranty card*
manual CD
(CHINA)
(JAPAN)
VGA cable
3. Presentation Plus
4. RS232 cable
Remote control with
batteries
Introduction 7