Remote Control - BenQ SP920 - XGA DLP Projector User Manual

Remote control

1
2
3
4
5
6
7
8
9
10
11
12
1. FREEZE
Freezes the projected image. See
image" on page 36
2. ASPECT
Selects the display aspect ratio. See
aspect ratio" on page 30
3. CAPTURE (This function is not available with the
SP920P series)
4. BRIGHTNESS
Adjusts brightness. See
page 32 for details.
10 Introduction
13
14
15
16
17
18
19
18
20
21
22
"Freezing the
for details.
"Selecting the
for details.
"Adjusting Brightness" on
5. CONTRAST
Adjusts contrast. See
32 for details.
6. TEST PATTERN
Displays the test pattern. See
page 45 for details.
7. LASER
Emits visible laser pointer light for presentation
purposes. See "Operating the LASER pointer" on
page 11 for details.
8. MENU/EXIT
Turns on the On-Screen Display (OSD) menu.
Goes back to previous OSD menu, exits and saves
menu settings. See "Using the On-Screen Display
(OSD) menus" on page 24
9. Left/
Starts the FAQ function. See
function" on page 36
10. ENTER
Activates the selected On-Screen Display (OSD)
menu item.
11. BLANK
Used to hide the screen image. See
image" on page 36 for details.
12. VOLUME+/VOLUME-
Adjusts the sound level. See
on page 38 for details.
13. POWER
Toggles the projector between standby mode and
on. See "Starting up the projector" on page 23,
"Shutting down the projector" on page 40
details.
14. DIGITAL ZOOM+/DIGITAL ZOOM-
Magnifies or reduces the projected image size. See
"Magnifying and searching for details" on page 29
for details.
"Adjusting Contrast" on page
"Test Pattern" on
for details.
"Utilizing FAQ
for details.
"Hiding the
"Adjusting the sound"
for