Kyocera FS-2100DN Operation Manual page 77

RAM File List (Printing a list of the files on the RAM disk)
This allows you to print a list of the files on the RAM disk.
IMPORTANT This is displayed when RAM Disk Mode is set to On .
Print.
Are you sure?
z RAM File List
[ Yes ] [
SSD File List (Printing a list of the files on the SSD)
This allows you to print a list of the files on the SSD.
IMPORTANT This is only displayed when the printer has an optional SSD (HD-6) installed and the drive is correctly
formatted.
Print.
Are you sure?
z SSD File List
[ Yes ] [
1
In the Report Print menu, press  or  to select RAM File
List.
2
Press [OK]. A confirmation message is displayed.
3
Press [Yes] ([Left Select]). The message Accepted. appears and
the printer prints a list of the files held in the RAM disk.
Pressing [No] ([Right Select]) returns to the Report Print menu
without printing the RAM disk file list.
No ]
1
In the Report Print menu, press  or  to select SSD File
List.
2
Press [OK]. A confirmation message is displayed.
3
Press [Yes] ([Left Select]). The message Accepted. appears and
the printer prints a list of the files held on the SSD.
Pressing [No] ([Right Select]) returns to the Report Print menu
without printing the SSD file list.
No ]
Note When Job Accounting is set but user login is not set,
the screen for entering Job Accounting information is
displayed. Enter the Account ID and press [OK].
Note When Job Accounting is set but user login is not set,
the screen for entering Job Accounting information is
displayed. Enter the Account ID and press [OK].
4-15
Operation Panel