Kyocera FS-2100DN Operation Manual page 61

For more details on operation, refer to Op Functions (Optional application settings) on page 4-131.
Secure Pull Printing (Optional Feature)
Secure Pull Printing is a printing feature where a user pulls the print job to a printer selected after the job is spooled in a
server. To use this feature, the following system environments are required.
6. The user pulls
the print job from
the selected printer.
3. The user logins to the
printer or other MFP via
an Authentication Server
using an ID card.
The Authentication server: KYOCERA Net Policy Manager (Optional Software) must be installed.
ID card and ID card reader: they are used to register and authenticate a user.
The Spooler server: it sends the print job to a selected printer after the user logs in.
For more details, contact your dealer or service representative.
2. The spooler server
5. The spooler
receives the print job.
server sends the
print job to the
selected printer.
4. The Authentication
Server confirms the
login information
registered.
3-7
Printing
1. A user sends
the print job to the
spooler server.