Kyocera FS-2100DN Operation Manual page 216

File Name Entry (entering a file name)
Enter the file name. The file name entered is displayed as the Job Name in the Job Status and Job Log.
Function:
1
********************- Duplex
2
EcoPrint
3
File Name Entry
File Name Entry:
doc*
Additional Info.: a b
4 *Job No. + Date
********************-
5
Date + Job No.
JobFinish Notice (Settings for notification when jobs are finished)
The end of a job is notified using E-mail.
Note To send E-mail on this machine, set the SMTP and POP3 settings to On. For details, refer to Protocol Detail
(Detailed settings for the network protocol) on page 4-60.
A mail server must be registered. For the method for setting a server, refer to the Command Center RX User Guide.
1
a b
2
3
a b
S
ABC
[ Text ]
4
5
6
7
In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
Press  or  to select File Name Entry.
Press [OK]. The File Name Entry screen appears.
Enter the file name using the numeric keys.
Note Up to 32 characters can be entered.
Refer to Character Entry Method on page A-2 for details on
entering characters.
Press [OK]. The Additional Info. screen appears.
Press  or  to select from the additional information that can be set
for the file name.
The following settings can be selected.
• None (No additional information is added.)
• Date (To add the date.)
• Job No. (To add the Job Number.)
• Job No. + Date (To add the Job Number and date.)
• Date + Job No. (To add the date and Job Number.)
Press [OK]. Register the file name and the Function menu
reappears.
5-20
Document Box