Kyocera FS-2100DN Operation Manual page 160

WSD-PRINT (WSD-PRINT setting)
Select whether or not to use WSD Print. The default setting is On.
WSD-PRINT:
1 Off
2 *On ********************-
Enhanced WSD (Enhanced WSD setting)
Set whether to use our proprietary web services. Network driver use this Enhanced WSD Web service. The default setting
is On.
Enhanced WSD:
1
Off
2 *On
********************-
EnhancedWSD(SSL) (Enhanced WSD (SSL) setting)
Set whether to use our proprietary web services over SSL. SSL must be set to On in SSL (SSL Server setting) on page 4-
99. The default setting is On.
EnhancedWSD(SSL): a b
1
Off
2 *On
********************-
1
In the Network Security menu, press  or  to select WSD-
PRINT.
2
Press [OK]. The WSD-PRINT screen appears.
a b
3
Press  or  to select whether WSD-PRINT is enabled.
4
Press [OK]. The WSD-PRINT setting is set and the Network
Security menu reappears.
1
In the Network Security menu, press  or  to select Enhanced
WSD.
2
Press [OK]. The Enhanced WSD screen appears.
a b
3
Press  or  to select whether Enhanced WSD is enabled.
4
Press [OK]. The Enhanced WSD setting is set and the Network
Security menu reappears.
1
In the Network Security menu, press  or  to select
EnhancedWSD(SSL).
2
Press [OK]. The EnhancedWSD(SSL) screen appears.
3
Press  or  to select whether Enhanced WSD (SSL) is enabled.
4
Press [OK]. The Enhanced WSD (SSL) setting is set and the
Network Security menu reappears.
4-98
Operation Panel