Kyocera FS-2100DN Operation Manual page 176

Domain Name (Entering of Domain Name)
Enter the domain name for the authentication server.
Note This setting is only displayed when NTLM or Kerberos has been set as the Server Type (Server type
selection) on page 4-113.
Domain Name:
*
NW User Property (Obtain the network user property)
This setting is to acquire user information from the LDAP server.
Note This setting is only displayed when Netwk Authentic. has been set as the Login Type (Enabling of User
Login Administration) on page 4-112 and NTLM or Kerberos has been set as the Server Type (Server type
selection) on page 4-113.
NW User Property: a b
1
********************- Off/On
2
Authenticat Type
Off/On (Switching network user property acquisition On/Off)
Set the NW User Property to On/Off.
3
4
1
2
a b
ABC
[ Text ]
3
4
1
2
[ Exit ]
1
Enter the port number using the numeric keys.
Note If the port number is registered as a blank field, the
default port number will be enabled.
Press [OK]. The port number is registered and the Netwk Auth.
Set menu reappears.
In the Netwk Auth. Set menu, press  or  to select Domain
Name.
Press [OK]. The Domain Name screen appears.
Enter the domain name using the numeric keys.
Note Up to 256 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
Press [OK]. The domain name is registered and the Netwk Auth.
Set menu reappears.
In the User Login Set. menu, press  or  to select NW User
Property.
Press [OK]. The NW User Property menu screen appears.
The options available in NW User Property are as follows:
• Off/On (Switching network user property acquisition On/Off)...4-
114
• Authenticat Type (Authenticat type setting)...4-115
Note Authenticat Type is only displayed when
Kerberos has been set as the Server Type (Server type
selection) on page 4-113.
In the NW User Property menu, press  or  to select Off/On.
4-114
Operation Panel