Communicating Using Ipv6 - Konica Minolta bizhub 361 Network Manual

Setup items by operation
1.41

Communicating using IPv6

Specifying settings for IPv6-based communication
To allocate the IPv6 address to this machine, use this setting. IPv6 can run simultaneously with IPv4.
However, Ipv6 does not run independently.
When using this machine under the IPv6 environment, there are the following restrictions.
- Printing using SMB is not available (available for direct hosting service).
- Sending scan data using SMB is not available (available for direct hosting service).
- SMB browsing is not available.
- The NTLM authentication is not available (however, this can be made for the Direct Hosting service).
- DHCPv6 cannot be used.
- IP filtering is not available.
- The printer driver installer cannot be used.
- PageScope Web Connection cannot be displayed with Flash.
Refer to the following for more information about Direct Hosting Service.
-
"Sending scan data to a Windows computer" on page 1-21
- "Printing (SMB)" on page 1-65
-
"Limiting users using this machine (Windows domain/workgroup)" on page 1-108
501/421/361
1
1-124