E-Mail Tx (Smtp); Status Notification Setting - Konica Minolta bizhub 361 Network Manual

Setup items by operation
Item
Max Mail Size
Server Capacity
Admin. E-mail Address
Binary Division
Divided Mail Size
1.31.3

Status Notification Setting

In Administrator mode of PageScope Web Connection, select the Maintenance tab - "Status Notification
Setting" - "E-mail Address" - [Edit].
Specify the following settings.
Item
Notification Address
Replenish Paper Tray
JAM
PM Call
Replace Staples
Replenish Toner
Finisher Tray Full
Service Call
Job Finished
Hole-Punch Scrap Box
Full
Fusing Unit Yield
501/421/361
Definition
Select whether to limit the size of sent messages.
To limit the maximum mail size, specify the max. allowance
of the mail size including the attached file.
Mails exceeding the maximum allowance are removed.
If a mail is separated, this setting is disabled.
Displays the administrator address.
If the administrator address is not specified, specify it at
"Machine Setting".
To divide the mail size, select "Binary Division" check box.
If the mail software used for receiving mails does not have
the mail restore function, the mails may not be read.
To divide the mail, specify a divided mail size.
Definition
Specify the notification address.
Provides notification when a paper-out condition occurs.
Provides notification when a paper misfeed occurs.
Provides notification when a periodic inspection is required.
Provides notification when a staple-out condition occurs.
Provides notification when a toner-out condition occurs.
Provides notification when the finisher tray becomes full.
Provides notification when a service call occurs.
Provides notification when the job is completed.
Provides notification when hole-punch scraps must be re-
moved.
Provides notification when the fusing unit must be replaced.
1
Prior confirmation
Receiving limit of the
server
Address for the adminis-
trator
Restore function of the
mail soft
Receiving limit of the
server
Prior confirmation
Notification address
1-91