Konica Minolta bizhub 361 Network Manual page 192

Setup items by operation
Item
Compose
(Date/Time)
Compose
(Page)
Compose
(Header/Footer)
Compose
(Stamp)
Stamp Combine Method
Limiting Access to Desti-
nations
When "Fax" was selected using [Registration]
Item
No.
Name
Destination Information
Resolution
File Type
Simplex/Duplex
Original Type
Separate Scan
Density
Background Removal
Scan Size
Application Setting
Timer TX
Password TX
F-Code
2-Sided Binding Direc-
tion
Stamp
Special Original
Book Scan
Erase
Compose
(Date/Time)
Compose
(Page)
Compose
(Header/Footer)
501/421/361
Definition
Specify whether to print the date/time.
If yes, specify settings for "Date Type", "Time Type", "Print Position", "Fine-Tune", "Pag-
es", and "Size".
Specify whether to print page numbers.
If yes, specify settings for "Page Number", "Chapter", "Print Position", "Fine-Tune", and
"Size".
Specify whether to print a header/footer.
If yes, specify the registration number of the header/footer. To check the registered head-
er/footer, click [Confirm Registered Contents].
Specify whether to print the stamp.
If yes, specify settings for "Preset Stamp" or "Registered Stamp", "Print Position", "Fine-
Tune", "Pages", and "Size". To check the registered stamp, click [Confirm Registered
Contents]. To use the registered stamp function, stamps must be registered from the con-
trol panel in advance.
Specify the stamp composition method.
Click [Display], and then specify the group that is allowed to access a destination and ref-
erence allowed level.
Definition
Displays the registration number.
Type in the registration name (up to 24 characters).
Specify the address information.
Select "Select from Address Book" or "Direct Input".
Specifies the resolution.
Specify the file format.
Specify whether the original is 2-sided.
Specify the quality of the original, such as text or photo.
Specify whether to divide scanning of the original.
Specify the density.
Adjust the density of the background.
Specify the original size ("Auto", "Standard Size" or "Custom Size").
If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is
selected, specify the height and width.
Click the [Display] button, and then specify settings for the functions that are displayed.
Specify whether to perform timer communication. If yes, enter the transmission time.
Specify whether to send the password. If yes, enter the password.
Specify whether to send the password using F code. If "Enable" is selected, type in the
SUB address and password.
Specify the binding orientation of the original.
A setting is made to decide whether the Stamp Setting is turned ON or OFF.
Specify the original in a different size.
Specify whether to perform book scan.
Specify whether to perform frame erase.
Specify whether to print the date/time.
If yes, specify settings for "Date Type", "Time Type", "Print Position", "Fine-Tune", "Pag-
es", and "Size".
Specify whether to pint page numbers. If yes, specify settings for "Page Number", "Chap-
ter", "Page Number Type", "Print Position", "Fine-Tune", and "Size".
Specify whether to print a header/footer.
If yes, specify the registration number of the header/footer. To check the registered head-
er/footer, click [Confirm Registered Contents].
1
1-179