Usb Memory; Supported External Memory Devices; Connecting The External Memory Device - Konica Minolta bizhub 36 User Manual

6.4 Direct Input
6.4.4

USB Memory

Enter the document name of the file sent to the USB memory.
Reference
- If a USB memory device has not already been plugged in, [USB Memory] is not available.
- With a USB memory transmission, only one destination can be specified.
- If [Admin Settings] ö [Security Settings] ö [Security Details] ö [Restrict Scan to USB] is set to [Re-
strict] is not available. For details on the Restrict Scan to USB, refer to the [User's Guide Administrator
Operations].

Supported external memory devices

Requirements for external memory devices of this machine are as follows.
- USB flash memory device that supports the USB (1.1/2.0) interface.
- FAT32-formatted memory device.
- The security function has not been added or the security function can be turned off.
- The memory capacity is less than 8 GB.
- USB flash memory device that is not recognized as multiple drives on the computer.
Reference
- Even if the external memory have the above prerequisite, the external memory may not work when it is
connected to the machine.

Connecting the external memory device

Reference
- Do not disconnect the external memory device while saving a document in the external memory device
or printing a document saved in the external memory device.
- Do not use the USB device (hard disk or USB mouse) other than the USB flash memory device.
- Do not disconnect the external memory just after connecting it.
bizhub 42/36
6
6-12