Operation Panel - Canon 2911B002 On-Screen Manual

Main Components

Operation Panel

(1) ON button / Power lamp
Turns the power on or off. Before turning on the power, make sure that the Document Cover is closed.
Note
Power and Alarm lamps
You can check the status of the machine with the
- Power
lamp Off: The power is off.
- Power lamp lit green: The machine is ready to print.
- Power lamp flashing green: The machine is initializing or shutting down.
- Alarm lamp lit or flashing orange: An error has occurred and the machine is not ready to
print. For details, refer to the "
.
Guide
- Power lamp flashes green once and
error that requires contacting your Canon service representative may have occurred.
For details, refer to the "
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
the Power lamp is not lit. If the power plug is disconnected from the wall outlet while the
Power lamp is lit or flashing, the machine may become unable to print since the Print Head
is not protected.
(2) LED (Light Emitting Diode)
Displays the number of copies, Maintenance menu code, or operational status such as an error code.
(3) [+] button
Specifies the number of copies.
Power
" in the on-screen manual: Advanced
Troubleshooting
Alarm lamp flashes orange once alternately: An
Troubleshooting " in the on-screen manual: Advanced Guide .
lamp and lamp.
Alarm
Page 7 of 623 pages