Loading Originals - Canon 2911B002 On-Screen Manual

Loading Originals

> Loading Paper / Originals
Contents
Loading Originals
Load originals to copy or scan on the Platen Glass.
Important
After loading the original, be sure to close the Document Cover before starting to copy or scan.
When scanning from a computer using a software application, you need to load originals in a
different way. For details, refer to the on-screen manual:
Note
Make sure any glue, ink, correction fluid, or the like on the original is completely dry before loading it.
1.
Load an original on the Platen Glass.
(1) Open the Document Cover.
Load an original with the side to copy or scan FACING DOWN on the Platen
(2)
Glass.
Align the corner of the original with the alignment mark
Important
Do not place any objects weighing more than 4.4 lb / 2.0 kg on the Platen Glass.
Do not press or put weight on the original with pressure exceeding 4.4 lb / 2.0 kg. Doing
so may cause the scanner to malfunction or the Platen Glass to break.
The machine cannot scan the shaded area (A) (0.04 inches / 1 mm from the edges of the
Platen Glass).
2.
Close the Document Cover gently.
>
Loading Originals to Copy or Scan
Advanced Guide
Advanced Guide
> Loading Originals
.
.
Page 64 of 623 pages
Troubleshooting