Scanning In Advanced Mode - Canon 2911B002 On-Screen Manual

Scanning in Advanced Mode

>
Advanced Guide Scanning
ScanGear (Scanner Driver) > Scanning in Advanced Mode
Scanning in Advanced Mode
In Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc.
when scanning documents.
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Starting ScanGear (Scanner Driver)
Important
Place the the document face-down and align correctly with the arrow/marks on the Platen.
2.
Click Advanced Mode.
The Advanced Mode tab appears.
Note
Settings are not retained when you switch between modes.
3.
Set Paper Size and Color Mode.
Note
See " Input Settings
4.
Click Preview.
Preview image appears in the Preview area.
>
Scanning with Other Application Software
" for details on Paper Size and Color Mode.
> Scanning with Advanced Settings Using
Page 431 of 623 pages