Eclipse CD5423 Owner's Manual page 78

How to operate the receiver with an optional DSP/EQ unit connected
Fine-tuning EQ functions
1 Press the [SEL] button until the desired equalizer mode
is displayed.
Turn the [SEL] button to switch frequencies.
2
The frequencies will switch in the following sequence:
63Hz 125Hz 250Hz 500Hz 1kHz 4kHz 12kHz
Press the [SEEK
3
[SEEK
[FAST
Hold down a button, [1] to [6], for more than two
4
seconds to preset a value.
When the preset value is changed, the display shows as follows:
ATTENTION
Press the [RTN] button.
5
At this time, other adjustments can also be made in Sound
Adjustment Mode.
Press the [SOUND] button to exit Sound Adjustment
6
Mode.
This cancels the adjustment mode. The selected value will
now take effect.
Buttons [1] to [6]
/FAST
] button: Increases the value.
] button: Decreases the value.
USER
78
[SEEK
[SOUND] button
[SEL]
button
[RTN] button
[FAST
] button to adjust the level.
1~6 (Preset ch No.)
] button
] button