How To Use An Optional Nob Remote Control; Turning The Power On/Off; Adjusting The Audio Volume - Eclipse CD5423 Owner's Manual

How to use an optional NOB remote control

Turning the power on/off

When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.
1
Press the [PWR] button.
The power turns on or off each time the button is pressed.
When the main unit is shut down, the remote control will not work.
ATTENTION

Adjusting the audio volume

Press the [AUDIO CONTROL] button, and turn it to the
1
left or right.
Each press of the button will switch the audio control modes.
Turn to the right: Increases the volume.
Turn to the left:
Cutting the volume instantly (muting)
Press the [MUTE] button for more than one second to cut the
volume or restore it instantly.
Press the [MUTE] button for more than one second if E-COM is
connected and less than one second if E-COM is not connected
ATTENTION
to cut the volume or restore it instantly.
Remote-control
5504
light receptor
R F
LEVEL
L L
CONT
REAR FRONT
LEFT MIN MAX RIGHT
SCAN REPEAT RANDOM
3 4 SCAN 5 RPT 6 RAND
[MUTE] button
Decreases the volume.
63
How to use an optional NOB remote control
[AUDIO
CONTROL]
PWR
button
FUNC
BAND MODE
TRACK
TUNE SEEK
DISC
[PWR] button
E-COM PWR
MUTE
ILLUMI