Table of Contents
Advertisement
How to turn the security
indicator on/off
Once ESN security is activated, the indicator
flashes whenever the vehicle's ignition switch is
turned off, warning potential thieves that the
unit is protected. However, if do not want this
visible deterrent, it may be turned off.
With the unit in standby, press the
1
[FUNC] button, then button [2]
and hold both for more than one
second.
[IND.
FLASH]
2
appears on the display.
[IND. FLASH] means the security
indicator will flash when the vehicle's
ignition switch is off, and [IND.-----]
means it will not. Repeat the above
steps to reactivate the flash mode.
How to read the Electronic
Serial Number
1
Check that the unit is in standby.
Press
and
2
button, then button [4], and hold
both for more than one second.
[ESN]
appears
followed by an eight-digit number;
this number is your electronic serial
number (ESN). You may use this
number to identify your Eclipse
CD5425E in the event of theft
recovery.
or
[IND.-----]
hold
the
[FUNC]
on
the
display,
ESN security operating procedure
105
VIII
Advertisement
Table of Contents
