Listening To Cd; Switching To The Cd Player Mode; Advancing To The Next Track Or Returning To The Beginning Of The Track Being Played - Eclipse CD5425E Owner's Manual

Listening to CD

1
Press the [CD
The front panel opens.
If a disc has already been loaded,
the disc is ejected by pressing the
[CD ] button.
Insert a CD into the disc slot,
2
label side up.
The CD will
playing.
ATTENTION
When a CD is already loaded, press the
[DISC] button to switch to the CD mode.
CAUTION
CD
[
Do not press the
being inserted. This could cause an injury
and damage to the front panel.
] button.
immediately start
]
button while CD is
How to operate the CD player
Switching to the CD player
mode
First press the [DISC] button for less than one
second to switch to the disc mode. It is
assumed here that a CD has already been
loaded into the unit.
Press the [DISC] button for less
1
than one second to switch to the
CD player mode.
This starts CD play.
If an external
connected, each additional press of
the [DISC] button will switch modes
from CD player
CD changer 2
A changer or player with no discs
loaded will be skipped.
ATTENTION
• Playback
when there is a scratch on a CD or
when the recorded side is dirty.
• Only two external CD changers
may be connected.
Advancing to the next track
or returning to the beginning
of the track being played
Turn the [SEL] button to the left or
1
right.
Turn to the right:
Advances to the next track.
Turn to the left:
Returns to the beginning of the track
being played. (Repeat turning for
previous tracks.)
81
CD changer
➔
CD changer 1
➔
CD player.
may be intermittent
IV
is
➔