Listening To Cd (Mp3 File); Switching To The Cd Player Mode - Eclipse CD2000 Owner's Manual

Operation

Listening to CD (MP3 file)

Insert a CD into the disc slot, label
1
side up.
The CD will immediately start playing.
ATTENTION
When a CD is already loaded, press the
[DISC] button to switch to the CD mode.
● Note ●
• When music data recorded in
the normal way (CD-DA) is
present on the same disc with
MP3 music files, the normally
recorded music data will be
played. To listen to the MP3
music files, press the button [3]
for more than one second.
• The optional
cannot be used to play MP3
files.
16
CD changer
Switching to the CD player
mode
First press the [DISC] button for less than one
second to switch to the disc mode. It is assumed
here that a CD has already been loaded into the
unit.
Press the [DISC] button for less
1
than one second to switch to the
CD player mode.
This starts CD play.
If an external CD changer and iPod is
connected, each additional press of
the [DISC] button will switch modes
from CD player
➔
CD changer 2
A changer or player with no discs
loaded will be skipped.
ATTENTION
• Playback may be intermittent when there is
a scratch on a CD or when the recorded
side is dirty.
• Only two external CD changers may be
connected.
➔ ➔
CD changer 1
CD player.