Table of Contents
Advertisement
Table 1. Features and specifications
Microprocessor: Supports one Intel
LGA-771 microprocessor
Note: Use the Configuration/Setup
Utility program to determine the type
and speed of the microprocessors in
the blade server.
Memory:
v Dual-channel, dual inline memory
modules (DIMMs): 6 DIMM
connectors
v Type: ECC double-data rate (DDR2
667) DRAM. Supports 512 MB, 1
GB, 2 GB, and 4 GB DIMMs with
up to 24 GB of total memory on the
system board
Drives: Support for a pair of one of
the following storage drives:
v Hot-swap, small form factor (SFF)
Serial Attached SCSI (SAS) hard
disk drives, and hot-swap solid
state storage drives.
v Fixed SFF Serial Advanced
Technology Attachment (SATA)
hard disk drives
v Fixed SFF SATA solid state storage
drives
What your blade server offers
Your blade server offers features, such as, the Baseboard management controller,
storage disk drive support, IBM
microprocessor technology, integrated network support, I/O expansion, large
system-memory capacity, Light path diagnostics, PCI Express, and power
throttling.
v Baseboard management controller (BMC)
6
BladeCenter HS12 Type 8014 or 8028: Installation and User's Guide
Predictive Failure Analysis (PFA)
alerts:
v Microprocessor
v Memory
v Hard disk drives
Electrical input: 12 V dc
Integrated functions:
v Expansion card interface
v Local service processor: Baseboard
management controller (BMC)
with Intelligent Platform
Management Interface (IPMI)
firmware
v ATI ES1000 video controller
v LSI 1064E SAS controller (type
8028 and 1916)
v SATA controller (type 8014)
v Concurrent keyboard/video/
mouse (cKVM) support when
optional cKVM feature card is
installed
v Light path diagnostics
v RS-485 interface for
communication with the
management module
v Automatic server restart (ASR)
v USB 2.0 for communication with
the cKVM and removable media
drives
v Serial over LAN (SOL)
v Redundant buses for
communication with keyboard,
mouse, and removable media
drives
The baseboard management controller (BMC) is on the system board of the
blade server. The BMC operates as the service processor for the blade server and
performs several tasks, including the following:
– Provides RS-485 interfaces to the management module
– Provides the following support:
- Intelligent Platform Management Interface (IPMI)
- Power control and advanced power management
- Reliability, availability, and serviceability (RAS) features
- Serial over LAN (SOL)
Environment:
v Air temperature:
– Blade server on: 10°C to 35°C
(50°F to 95°F). Altitude: 0 m to
914.4 m (0 ft to 3000 ft)
– Blade server on: 10°C to 32°C
(50°F to 89.6°F). Altitude: 914.4 m
to 2133.6 m (3000 ft to 7000 ft)
– Blade server off: 10°C to 43°C
(50°F to 89.6°F). Altitude: 914.4 m
to 2133.6 m (3000 ft to 7000 ft)
– Blade server shipping: -40°C to
60°C (-40°F to 140°F)
v Humidity:
– Blade server on: 8% to 80%
– Blade server off: 8% to 80%
Size:
v Height: 24.5 cm (9.7 inches)
v Depth: 44.6 cm (17.6 inches)
v Width: 2.9 cm (1.14 inches)
v Maximum weight: 4.8 kg (10 lb)
®
Director, IBM Enterprise X-Architecture
®
,
Advertisement
Table of Contents
