Table of Contents
Advertisement
2. When the message Press Ctrl-C to start LSI Logic Configuration Utility
3. Follow the instructions on the screen to modify the SAS storage drive and SAS
Using the LSI Logic Configuration Utility program
Use these instructions to start the LSI Logic Configuration Utility program.
You can use the LSI Logic Configuration Utility program to perform the following
tasks:
v Set the SAS device scan order
v Set the SAS ID for the controller
v Manage the SAS RAID configuration
To start the LSI Logic Configuration Utility program, complete the following steps:
1. Turn on the blade server, and make sure that the blade server is the owner of
2. When the <<<Press Ctrl-C to start LSI Logic Configuration Utility>>>
3. Use the arrow keys to select the controller from the list of adapters; then, press
4. Follow the instructions on the screen to change the settings of the selected
is displayed, press F1. If an administrator password has been set, you must
type the administrator password to access the full LSI Logic Configuration
Utility menu.
controller settings.
the keyboard, video, and mouse.
prompt is displayed, press Ctrl+C.
Enter.
items; then, press Enter. If you select SAS Topology or Advanced Adapter
Properties, additional screens are displayed.
Chapter 4. Configuring the blade server
43
Advertisement
Table of Contents
