Enabling Bandwidth Fairness - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Configuring Module Interface Shared Resources
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Enabling Bandwidth Fairness

To enable bandwidth fairness on multiple 48-port or 24-port 4-Gbps, or any 8-Gbps Fibre Channel
switching modules using Device Manager, follow these steps:
Step 1 Choose Physical > Modules.
You see the Module dialog box as shown in
Figure 22-15
Step 2 Select enable from the BandwidthFairnessConfig drop-down list for each module for which you want to
enable bandwidth fairness.
Step 3 Click Apply to save the changes.
To enable bandwidth fairness on a single 48-port or 24-port 4-Gbps Fibre Channel switching module
using Device Manager, follow these steps:
Right-click a module and select Configure.
Step 1
You see the Module dialog box as shown in
Cisco MDS 9000 Family Fabric Manager Configuration Guide
22-38
Chapter 22
Module Dialog Box
Configuring Generation 2 and Generation 3 Switching Modules
Figure 22-15.
Figure 22-16.
OL-17256-03, Cisco MDS NX-OS Release 4.x