Viewing Analysis Reports - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Health
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 7-5
Select one of the fabrics to display a table of syslog information for that fabric.
Step 2
Step 3 Expand a fabric and select one of the switches to display syslog information for that switch.
Step 4 If you have selected a fabric and one or more switches in that fabric have system messages, you see
Events, Hardware, Accounting, and Link Incidents in the Files column. Click one of these message
types to see system messages for the switches in that fabric filtered by the message type you clicked.
Note

Viewing Analysis Reports

As of Cisco SAN-OS Release 3.2(1) and up to Cisco NX-OS 4.1(3a), you can run or schedule analysis
reports to summarize the Fabric Manager Server database statistics. You can run or schedule the
following analysis reports:
•
•
•
Cisco MDS 9000 Family Fabric Manager Configuration Guide
7-12
Syslog Tab
If you select a switch, choose an interval and a message type from the drop-down lists, and then
click Filter to see system messages filtered by the message type you chose.
Connectivity (Host to Storage or Storage to Host)—The connectivity report summarizes zoning for
multiple hosts or storage devices. If you choose host to storage, the report shows all storage devices
zoned as accessible by each host. If you choose storage to host, the report shows all hosts that can
access a specific storage device.
Zoning Discrepancies—The zoning discrepancies report identifies zoning issues that might impact
connectivity or security.
Multi Path—The multi path report determines the number of active and inactive paths between
hosts and storage enclosures.
Chapter 7 Fabric Manager Web Client
OL-17256-03, Cisco MDS NX-OS Release 4.x