Lexmark P910 User Manual page 165

User's guide
Table of Contents

Advertisement

Troubleshooting
The Continue button is unavailable
Try the following solutions in the order they appear until the Continue button becomes active and available:
C
USB
HECK IF THE
CABLE IS SECURELY PLUGGED INTO THE
PRINTER
USB ports are marked with
M
AKE SURE THE PRINTER IS PLUGGED IN AND TURNED ON
Make sure the
button is lit. If you have just turned on the printer, then you might need to disconnect the USB
cable and then reconnect it.
M
USB
AKE SURE THE
Test the USB port by connecting other devices to it. If you can successfully use other devices from the port, then the
port is working.
Notes:
Your port may be working fine, but certain conflicts can occur with multiple USB devices. Try disconnecting
one of your other USB devices.
If the USB port on the computer is not working, then try using the other USB ports on the computer.
M
USB
AKE SURE THE
Try using a different USB cable. If you are using a cable longer than 10 feet, then try using a shorter cable.
Note: USB hubs, extension cables, port replicators, and docking stations may cause connection issues. Try
disconnecting these devices so that your printer is directly connected to your computer.
M
AKE SURE YOU ARE USING THE CORRECT
Compare the printer model on the CD to the printer model on the printer. The numbers should either match exactly
or be within the same series.
If unsure, look for an updated version of the printer software on the Lexmark Web site. For more information, see
the printer User's Guide.
R
ECONNECT THE PRINTER POWER SUPPLY
1
Turn off the printer.
Note: Make sure the printer is not in Sleep mode. Press and hold
2
Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.
3
After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall
outlet.
4
Turn on the printer.
.
PORT ON THE COMPUTER IS WORKING
CABLE IS WORKING
CD
USB
PORTS ON BOTH THE COMPUTER AND THE
FOR YOUR PRINTER MODEL
for three seconds to turn off the printer.
165

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro910 series

Table of Contents