Scanning; Tips For Scanning; Scanning To A Local Computer - Lexmark P910 User Manual

Scanning

Scanning
ADF
Use the ADF for multiple‑page documents.
Note: The ADF is available only in select printer models. If you
purchased a printer without an ADF, then load original
documents or photos on the scanner glass.

Tips for scanning

•
Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF
does not support the original document size.
•
When using the ADF, adjust the paper guide on the ADF to the width of the original document.
• When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image.
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
• When the document to be scanned is in place with the settings you want, press

Scanning to a local computer

1
Load the original document.
2
From the home screen, touch Scan > Computer > USB‑Connected Computer.
The USB‑connected computer is the default destination that will receive the scan.
Note: Make sure the scan software is installed on the destination computer.
3
Select the output file type you want to create and other scan options. If necessary, touch Accept each time you
make a selection.
4
Press .
Scanner glass
Use the scanner glass for single pages, small items (such
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
to start scanning.
59