Lexmark P910 User Manual page 140

Troubleshooting
Load [Paper Source] with [Size] [Type] Paper
Try one or more of the following:
•
Load the specified paper in the tray.
• Touch Paper Loaded, Continue to clear the message and continue printing.
•
Press to cancel the current job.
Memory Device Error
Try one or more of the following:
• Remove the memory device, and then reinsert it into the card slot or USB port.
• Touch OK or press
Network [x] Software Error
[x] is the number of the network connection.
Try one or more of the following:
•
Touch Continue to clear the message.
•
Turn the printer off and then back on to reset the printer.
No E‑mail Address
The e‑mail contact or at least one member of the group you selected does not have an e‑mail address. Try one or more
of the following:
•
Touch Yes to enter the e‑mail address, and then touch Accept every time you add a recipient.
•
Touch Edit the Group to enter the missing e‑mail addresses, and then touch Accept every time you add a recipient.
• Touch Send Anyway to send the e‑mail only to group members with e‑mail addresses.
•
Touch No to cancel the e‑mail.
Out of Paper in Tray [x]
Try one or more of the following:
•
Load the specified paper in the tray.
• Touch Paper Loaded, Continue to clear the message and continue printing.
•
Press to cancel the current job.
Paper Tray [x] Detected
Try one or more of the following:
• Touch Yes to clear the message.
•
Touch Change Settings, and then select the paper size and paper type of the media loaded. Touch Accept for each
selection.
to clear the message.
140