Disabling Zoning; Saving Changes To An Existing Configuration; Clearing The Zoning Database - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

Disabling Zoning

When you disable the active configuration, the Zoning feature is disabled on the
fabric and all devices within the fabric can communicate with all other devices.
This does not mean that the Zoning database is deleted however, only that there is
no Configuration active on the fabric.
1. Access the Zone Administration window.
2. Select Actions > Disable Zoning to disable the current enabled
3. Click the Yes button if you want to disable the current Configuration.

Saving Changes to an Existing Configuration

To save changes to an existing configuration, perform the following procedure.
1. Access the Zone Administration window.
2. Select the Config tab.
3. Make desired changes to Configuration (see
4. Select the Actions > Save Config Only option.

Clearing the Zoning Database

The following procedure disables any active Configuration, and deletes the entire
zoning database.
1. Access the Zone Administration window.
Web Tools Version 3.1.x/4.1.x User Guide
See "Accessing the Zone Administration
information.
Configuration.
The Disable Config warning appears.
See "Accessing the Zone Administration
information.
You can make changes to a Configuration that is currently enabled; changes
will not appear until the Configuration is disabled and re-enabled.
The Configuration changes will be saved. Changes will not take effect until
the Configuration is re-enabled.
To enable the configuration, see
Window" on page 204 for more
Window" on page 204 for more
"Creating a
"Enabling a Configuration" on page 214.
Zone Administration
Zone" on page 226).
215