Threshold Notification Fields Descriptions; Threshold Configuration Area Configuration Field Descriptions - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

Fabric Watch

Threshold Notification Fields Descriptions

The Fabric Watch > Threshold Configuration > Area Configuration fields are
described in
Table 42: Threshold Configuration Area Configuration Field Descriptions
Unit
High
BufferSize
TimeBase
Low
Select Boundry Level
Alarm Notification
Mechanisms
Select Alarm Level
Update Flash
178
Table 42
Field
Set or display the selected unit values used for the chosen
area. Depending on the area of interest, this is figured in
units of "downs, reconfigs, errors, changes, logins," etc.
Set or display the number of high boundaries (the highest
limit at which an element will not trigger an event) for the
selected area.
Set or display the threshold boundry buffer size of the
selected area.
Set or display the basic unit of time in which events are
recorded for the selected area. The units available from the
drop-down menu are: none, second, minute, hour, or day.
Set or display the number of low boundaries (the lowest limit
at which an element will not trigger an event) for the selected
area.
Select either a default or custom setting for the boundry levels
from the drop-down menu. The default values are shown in
parenthesis.
Select Alarm settings for Errorlog, SNMP, RAN, Portlog and
Email to be active on the switch side.
Select either a custom or default setting for the alarm level
from the drop-down; this setting will be active on the switch
side menu.
Check box to update Flash Memory. From Web Tools, when
you set new threshold values and click Apply, these new
values are sent to the Fabric Watch daemon on the switch
and activated at once. These values are not however saved in
RAM and can be lost after a switch reboot.
When you check the update flash box, the current set of
threshold values will be committed to flash memory, which is
persistent storage. Those values are then saved over a switch
reboot.
Description
Boundary
Alarm Setting
Web Tools Version 3.1.x/4.1.x User Guide