Assigning A Name To A Port; Disabling A Port Over Reboots - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

4. Select the desired speed for the corresponding port (see
5. Click the Apply button.

Assigning a Name to a Port

You can optionally name a port by performing the following steps.
1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Port Setting tab.
4. Click in the Name column; select the field that corresponds to the Port you
5. Enter a name for the port. Port names can be from 0 to 32 alphanumeric
6. Click the Apply button.

Disabling a Port over Reboots

To optionally disable a port, so that it is disabled over reboots perform the
following steps.
1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Port Setting tab.
4. Select the slot and port you want to disable over reboots.
5. Check the Persistent Disable checkbox for that port.
6. Click the Apply button.
Web Tools Version 3.1.x/4.1.x User Guide
Setting Tab" on page 115).
on page 92).
want to name.
characters. Port names do not need to be unique.
on page 92).
Switch Admin Window
"About the Port
"About the Switch Admin
"About the Switch Admin
Window"
Window"
119