Threshold Configuration Element Configuration Field Descriptions; Threshold Configuration Report Field Descriptions - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

The Fabric Watch > Threshold Configuration > Element Configuration fields
are described in
Table 43: Threshold Configuration Element Configuration Field Descriptions
Select Area
Select Element
Enable
Disable
Triggered
Continuous
Time Interval (in
secs)
The Fabric Watch > Threshold Configuration > Configuration Report fields
are described in
Table 44: Threshold Configuration Report Field Descriptions
Configuration for
Class
Begin Area
Begin Element
Changed
Exceeded
Web Tools Version 3.1.x/4.1.x User Guide
Table 43.
Field
Use the drop-down menu to select the specific area to
configure, such as E-Ports. The items that appear in this menu
will vary depending on the item selected in the Navigation
tree.
Use the drop-down menu to chose the element to configure,
such as a fabric.
Select the radio button to enable alarms.
Select the radio button to disable alarms.
Select the Triggered Behavior mode if you want Fabric Watch
to register an event when a variable exceeds a threshold. An
event will not be triggered again until the variable falls and
exceeds the threshold again.
Select Continuous mode if you want Fabric Watch to register
an event when a variable exceeds a threshold and continue
to register an event for every time interval.
Select the amount of time (in seconds) that you want Fabric
Watch to poll for a new event.
Table 44.
Field
Describes the class that is being reported. The item selected in
the Navigation tree appears here.
Describes the current settings configured for the selected
area. See
Describes the current settings configured for the selected
area.
Displays thresholds that have changed.
Displays thresholds that have been exceeded.
Description
Status
Behavior Type
Description
Table 43.
Fabric Watch
179