Using the Fabric Assist Tab
The functions provided on the Fabric Assist tab are shown in the following
sections.
Creating a Fabric Assist Zone
For this example, the Mixed Zone level is used.
1. Access the Zone Administration window; see
2. Enter the admin level user name and password.
3. Select View > Mixed Zoning. You can select any view except the Device
4. Select the Fabric Assist tab.
5. Select the Create button.
6. Enter a name for the new FA zone and Click the OK button.
7. Highlight the desired Fabric Assist zone members from the Member Selection
8. Click the Add Member button.
Modifying the Members of a Fabric Assist Zone
To modify the members of a Fabric Assist Zone, perform the following steps:
1. Access the Zone Administration window.
2. Select the Fabric Assist tab.
Web Tools Version 3.1.x/4.1.x User Guide
Administration
Window" on page 204.
The Zone Administration window appears.
View.
The Mixed View tab appears.
The Create New FA dialog box appears.
A fabric host is required.
list.
The new members appear in the Fabric Assist Members window.
The newly created FA zone also appears in the Config tab.
See
"Accessing the Zone Administration
information.
Zone Administration
"Accessing the Zone
Window" on page 204 for more
237