Using the Operation Panel
The operation panel consists of the main switch and three indicator
lights. See Figure 4.
FIGURE 4. Operation panel
Main Switch Functions
Power ON: Push once quickly while the printer is OFF.
Power OFF: Push twice quickly.
NOTE: The printer automatically powers off when running under
battery power and if there has been no activity for 2 minutes
(no data received, no paper inserted, etc.) but only if the
auto-off timer is active. See p.38, Auto-Off Timer Feature.
Manual Form Feed: With power ON and paper inserted, press and
hold the main switch to feed (or eject) paper.
Charge the Battery: With the printer off, push the main switch and
hold it down for several seconds until the green BATTERY indicator
lights and stays lit. Press the main switch again and hold it until the
BATTERY indicator begins to blink. This bypasses the NiMH
discharging process and begins to charge the NiMH battery
immediately. The green battery indicator light blinks until charging is
complete.
To Power Off During Charge Mode: Push the main switch twice
quickly (same as when in normal operating mode).
Page 4