Rebooting And Shutting Down The Utm - NETGEAR UTM5EW-100NAS Appliance Reference Manual

ProSecure Unified Threat Management (UTM) Appliance Reference Manual
To generate the Network Statistic Report:
1. Locate the Network Statistics Report section on the Diagnostics screen.
2. Click Generate Network Statistics. The network statistics report is sent as an e-mail to the
recipient that you specified on the Email Notification screen (see
Notification Server" on page

Rebooting and Shutting Down the UTM

You can perform a remote reboot (restart), for example, when the UTM seems to have become
unstable or is not operating normally.
Note: Rebooting breaks any existing connections either to the UTM (such as your
management session) or through the UTM (for example, LAN users accessing the
Internet). However, when the reboot process is complete, connections to the
Internet are automatically re-established when possible.
To reboot the UTM:
1. Locate the Reboot the System section on the Diagnostics screen.
2. Click the Reboot button. The UTM reboots. (If you can see the unit: the reboot process is
complete when the Test LED on the front panel goes off.)
Note: See also
To shut down the UTM:
1. Locate the Reboot the System section on the Diagnostics screen.
2. Click the Shutdown button. The UTM shuts down.
Note: You can shut down the UTM using the Web Management Interface, but you cannot
start up the UTM using the Web Management Interface.
11-48
11-5).
"Rebooting Without Changing the Firmware" on page
v1.0, January 2010
"Configuring the E-mail
Monitoring System Access and Performance
10-21.