Connecting The Fwg114P V2 Wireless Firewall/Print Server; Verify That Basic Requirements Are Met - NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Connecting the FWG114P v2 Wireless Firewall/Print Server

This section provides instructions for connecting the FWG114P v2 Wireless Firewall/Print Server.
Also, the Resource CD for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
(SW-10023-03), included with your router, contains an animated Installation Assistant to help you
through this procedure.

Verify That Basic Requirements Are Met

Assure that the following requirements are met:
• You have your broadband Internet service settings handy.
• The computer is configured to obtain an IP address automatically via DHCP. For instructions
on how to do this, please see the Reference Manual on the Resource CD for the ProSafe
Wireless 802.11g Firewall/Print Server Model FWG114P (SW-10023-03).
C
ONNECT THE WIRELESS FIREWALL
1.
Turn off your computer and cable or DSL modem.
a.
Disconnect the Ethernet cable (A) from your computer which connects to the broadband
b.
modem.
Disconnect
A
from
computer
Figure 3-1: Disconnect the broadband modem
3-4
/
PRINT SERVER
Connecting the FWG114P v2 to the Internet
201-10301-02, May 2005