NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual page 103

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
Set up the Netgear printer port driver.
Click Finish when the Installation
a.
Wizard is done.
The Printer Port Setup utility displays,
and queries the network to locate the
print server in the FWG114P v2.
After a short delay, the Printer Port
Setup utility will display the port it finds
in the FWG114P v2 print server.
Click Add to add this printer port to your
b.
computer.
The Printer Port Setup utility will report
that Port FWG114P_P1 has been added
to the computer.
Click Exit to exit the Printer Port Setup
c.
utility.
The Windows Add Printer Wizard
automatically runs.
Print Server
Netgear Printer Port Installation Wizard
Note: Under Windows 95, you may
receive an error message stating that
SETUPAPI.DLL was not found. In this
case, you should upgrade your Internet
Explorer to version 5 or later.
Netgear Printer Port Setup Utility
201-10301-02, May 2005
7-7