NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual page 124

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
Table 8-1. VPN Manual Policy Configuration Fields
Field
SPI - Incoming
SPI - Outgoing
Enable Authentication
Authentication
Algorithm
Key - In
Key - Out
Encapsulated Security
Payload (ESP) Configuration
SPI - Incoming
SPI - Outgoing
Enable Encryption
8-12
Description
Enter a Hex value (3 - 8 chars). Any value is acceptable, provided the
remote VPN endpoint has the same value in its "Outgoing SPI" field.
Enter a Hex value (3 - 8 chars). Any value is acceptable, provided the
remote VPN endpoint has the same value in its "Incoming SPI" field.
Use this checkbox to enable or disable AH. Authentication is often not
used. In this case, leave the checkbox unchecked.
If you enable AH, then select the authentication algorithm:
• MD5 is the default.
• SHA1 is more secure.
Enter the keys in the fields provided. For MD5, the keys should be 16
characters. For SHA-1, the keys should be 20 characters.
Enter the keys.
• For MD5, the keys should be 16 characters.
• For SHA-1, the keys should be 20 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Authentication Algorithm "Key - Out" field.
Enter the keys in the fields provided.
• For MD5, the keys should be 16 characters.
• For SHA-1, the keys should be 20 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Authentication Algorithm "Key - In" field.
ESP provides security for the payload (data) sent through the VPN tunnel.
Generally, you will want to enable both encryption and authentication
when you use ESP. Two ESP modes are available:
• Plain ESP encryption
• ESP encryption with authentication
These settings must match the remote VPN endpoint.
Enter a Hex value (3 - 8 chars). Any value is acceptable, provided the
remote VPN endpoint has the same value in its "Outgoing SPI" field.
Enter a Hex value (3 - 8 chars). Any value is acceptable, provided the
remote VPN endpoint has the same value in its "Incoming SPI" field.
Use this checkbox to enable or disable ESP Encryption.
201-10301-02, May 2005
Virtual Private Networking