NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual page 117

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
Table 8-1. IKE Policy Configuration Fields
Field
Remote
Remote Identity Type
Remote Identity Data
IKE SA Parameters
Encryption Algorithm
Authentication Algorithm
Authentication Method
Pre-Shared Key
RSA Signature
Diffie-Hellman (D-H) Group
SA Life Time
Virtual Private Networking
Description
These parameters apply to the target remote FWG114P v2, VPN gateway,
or VPN client.
Use this field to identify the remote FWG114P v2. You can choose one of
the following four options from the drop-down list:
• By its Internet (WAN) port IP address.
• By its Fully Qualified Domain Name (FQDN) — your domain name.
• By a Fully Qualified User Name — your name, e-mail address, or
other ID.
• By DER ASN.1 DN — the binary DER encoding of your ASN.1 X.500
Distinguished Name.
This field lets you identify the target remote FWG114P v2 by name.
These parameters determine the properties of the IKE Security
Association.
Choose the encryption algorithm for this IKE policy:
• DES is the default.
• 3DES is more secure.
If you enable Authentication Header (AH), this menu lets you to select from
these authentication algorithms:
• MD5 is the default.
• SHA-1 is more secure.
You may select Pre-Shared Key or RSA Signature.
Specify the key according to the requirements of the Authentication
Algorithm you selected.
• For MD5, the key length should be 16 bytes.
• For SHA-1, the key length should be 20 bytes.
RSA Signature requires a certificate.
The DH Group setting determines the bit size used in the key exchange.
This must match the value used on the remote VPN gateway or client.
The amount of time in seconds before the Security Association expires;
over an hour (3600) is common.
201-10301-02, May 2005
8-5