NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual page 147

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2
– From the Remote Identity drop-down box, select Fully Qualified Domain Name.
– Type VPNclient in the Remote Identity Data. This will also be entered in the VPN Client
My Identity ID Type fields, as seen in
– From the Encryption Algorithm drop-down box, select 3DES. This will also be selected in
the VPN Client Security Policy Authentication Phase 1 Proposal 1 Encrypt Alg field, as
seen in "Connection Security Policy Authentication (Phase 1)" on page
– From the Authentication Algorithm drop-down box, select SHA-1.This will also be
selected in the VPN Client Security Policy Authentication Phase 1 Proposal 1 Hash Alg
field, as seen in
– From the Authentication Method radio button, select Pre-shared Key. This will also be
selected in the VPN Client Security Policy Authentication Phase 1 Proposal 1
Authentication Method field, as seen in
(Phase 1)" on page
– In the Pre-Shared Key field, type hr5xb84l6aa9r6. You must make sure the key is the
same for both the client and the FWG114P v2 Wireless Firewall/Print Server. This will
also be selected in the VPN client Security Policy Authentication Phase 1 Proposal 1
Encrypt Alg field, as seen in
– From the Diffie-Hellman (DH) Group drop-down box, select Group 2 (1024 Bit). This
will also be selected in the VPN Client Security Policy Authentication Phase 1 Proposal 1
Key Group field, as seen in
page 8-42.
– In the SA Life Time field, type 86400.
Click Apply. This will bring you back to the IKE Policies Menu.The FWG114P v2 IKE Policy
is now displayed in the IKE Policies page.
Virtual Private Networking
"Connection Security Policy Authentication (Phase 1)" on page
8-42.
"Connection Identity Pre-Shared Key" on page
"Connection Security Policy Authentication (Phase 1)" on
201-10301-02, May 2005
"My Identity" on page
"Connection Security Policy Authentication
8-40.
8-42.
8-42.
8-41.
8-35