Set Up Backup
Schedule
Back Up Changes
Restart the
Server to Effect
Changes
Æ
Schedule page
Backup
Æ
Backup
Backup page
If an internal DAT tape drive is installed in the server or if an
external tape drive is attached directly to the server (see chapter 8,
"Adding a Tape Drive"), then use these backup pages to back up
files stored on the server (as described in chapter 9, "Backing Up
and Restoring Files").
Æ
Configuration
Save/Restore Configuration
Save Configuration page
After you have made configuration changes, you should always use
this page to store the new server and network configuration
information on the volume for backup along with the file system
configuration information and the data files. You can do this either
before or after restarting the server if necessary (see "Restart"
below).
To make the backup for disaster recovery, see "Making a Disaster
Recovery Backup Tape" on page 9-7.
Æ
Configuration
Shutdown/Restart page
Many configuration changes, though they have been applied using
[Apply], require the server to be restarted before taking effect. You
can perform the restart by selecting Shutdown and Restart on this
page. HP Server Admin will be unavailable until the restart
completes. See "Restart Procedures" on page 6-6 for more
information.
Configuration Using a Browser: HD Server Admin 4
Æ
-
13