Table of Contents
Advertisement
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
3. From the RIP Direction pull-down menu, select the direction in which the VPN firewall will
send and receives RIP packets. The choices are:
•
None. The VPN firewall neither broadcasts its routing table nor does it accept any RIP
packets from other routers. This effectively disables RIP.
•
Both. The VPN firewall broadcasts its routing table and also processes RIP information
received from other routers.
•
Out Only. The VPN firewall broadcasts its routing table periodically but does not accept
RIP information from other routers.
•
In Only. The VPN firewall accepts RIP information from other routers, but does not
broadcast its routing table.
4. From the RIP Version pull-down menu, select the version:
•
Disabled. The default section disables RIP versions.
•
RIP-1. A class-based routing that does not include subnet information. This is the most
commonly supported version.
•
RIP-2. This includes all the functionality of RIPv1 plus it supports subnet information.
Though the data is sent in RIP-2 format for both RIP-2B and RIP-2M, the modes in which
packets are sent are different.
–
RIP-2B. Sends the routing data in RIP-2 format and uses subnet broadcasting.
–
RIP-2M. Sends the routing data in RIP-2 format and uses multicasting.
5. Authentication for RIP2B/2M required? If you selected RIP-2B or RIP-2M, check the Yes
radio box to enable authentication, and enter the MD-5 keys to authenticate between devices in
the First Key Parameters and Second Key Parameters sections on the screen.
6. Click Reset to discard any changes and revert to the previous settings or click Apply to save
your settings.
3-18
v1.1, August 2010
LAN Configuration
Advertisement
Table of Contents
Troubleshooting
