Configuring Lan Dmz Rules - NETGEAR FVS318G-100NAS Reference Manual

Figure 4-5
4. Configure the settings based on the descriptions in
5. Click Apply. The new rule will appear in the Outbound Services table. The rule is
automatically enabled.
The procedure to add a new DMZ WAN inbound service policy is similar to the procedure
described above with the exception that you click Add under the Inbound Services table, you
configure the settings based on the descriptions in
to the Inbound Services table.

Configuring LAN DMZ Rules

The LAN DMZ Rules screen allows you to create rules that define the movement of traffic
between the LAN and the DMZ. The Default Outbound and Inbound Policies is to allow all traffic
between the local LAN and DMZ network. Firewall rules can then be applied to block specific
types of traffic from either going out from the LAN to the DMZ (outbound) or coming in from the
DMZ to the LAN (inbound).
Firewall Protection and Content Filtering
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
Table 4-2 on page
v1.1, August 2010
Table 4-1 on page 4-3.
4-6, and the policy is added
4-13