Re-Write For Digital Soft Firmware - Toshiba MW27H63 Service And Owner's Manual

1. Confirm that the AC cord is plugged out.
2. Using the Serial Communication Change JIG (JG205), connect the set to personal computer. (Refer to Fig. 1)
NOTE: It is possible to write only with the personal computer of WINDOWS.
3. Using the Flash UP-Date Soft Disc (JG206) and USA SD DTV ROM DISC(JG176), please Re-write the DIGITAL SOFT
FIRMWARE.
The operating manual for Re-writing is included in Flash UP-Date Soft Disc (JG206).

RE-WRITE FOR DIGITAL SOFT FIRMWARE

Fig. 1
C4-2