Servicing Fixtures And Tools; Re-Write For Dvd Firmware - Toshiba 15DLV16 Service Manual

JG176 Up-Date Disc
1. Turn on the power, and set the DVD mode.
2. Confirm that the "No Disc" will be appeared on the screen.
3. Press both VOL. DOWN button on the set and Channel button (5) on the remote control for more than 2 seconds.
4. Press VOL. UP/DOWN button on the unit to check if all the keys on the unit do not function.
NOTE: To check if DVD Write mode is set.
When inserting Up-Date Disc at Non DVD Write mode, the read error will happen.
5. Insert the Up-Date Disc. (Refer to SERVICING FIXTURE AND TOOLS)
6. Automatic read will start and "Firmware upgrade Please Wait" will be displayed on the screen.
At this time, the horizontal noise lines may appear. But no problem.
NOTE: Do not turn off the unit on the way or operate the keys on the unit and remocon.
Up-Date error will happen and can not be done with the Up-Date of Up-Date Disc.
7. After the Up-Date, Logo screen will appear.
8. Unplug the AC cord, then plug it in.
After the write, set to the initializing of shipping.
9. Turn on the power, and set the DVD mode.
10. Press both VOL. DOWN button on the set and Channel button (4) on the remote control for more than 2 seconds.
The "INITIALIZE 5 ---> COMPLETE" will appear on the screen.
11. Then unplug the AC cord, and plug it in.
CHECK FOR THE FIRMWARE VERSION
12. Turn on the power, and set the DVD mode.
13. Press both Channel button (1) on the remote control and the STOP button on the set for more than 2 seconds.
Firmware version will be displayed on the top left of the screen.
No Disc
AAEJA6316A
When the changed version displays, the Re-write will be completed.
14. Turn off the power

SERVICING FIXTURES AND TOOLS

Ref. No.
Part No.
JG176 APJG176098

RE-WRITE FOR DVD FIRMWARE

A A E J A 6 3 1 6 A
Fixed
Parts Name
Up-Date Disc
Released times on the same date
Release date (Example: 2006.3.16)
C-2
Remarks
Up-Date of the Firmware
A = October
B = November
C = December