Chapter 83 Wireless Ap Failure Status Command List - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Chapter 83 Wireless AP Failure Status
delete wireless ap_failed [<macaddr> | all]
delete wireless ap_failure list
show wireless ap_failure {<macaddr>}
83-1 delete wireless ap_failed
Description
This command is used to delete one or all managed AP entries with a failed status. A failed status
indicates that the Wireless Switch has lost contact with the managed AP.
Format
delete wireless ap_failed [<macaddr> | all]
Parameters
<macaddr> - Enter the MAC address, of the falied managed AP, here.
all - Specifies that all failed managed AP entries, will be deleted.
Restrictions
Only Administrators can issue this command.
Example
To delete all managed AP entries with a failed status:
DWS-3160-24PC:admin#delete wireless ap_failed all
Command: delete wireless ap_failed all
Are you sure you want to delete all the failed managed AP entries? (y/n) y
delete wireless ap failed
All the failed managed AP entries deleted.
Success.
DWS-3160-24PC:admin#
83-2 delete wireless ap_failure list
Description
This command is used to delete all entries from the AP failure list. Entries will normally age out
according to the configured age time. The AP failure list includes entries for all APs that have failed
to validate or authenticate to the Wireless Switch.
Command List
734